Abrasives · metalworking · superhard materials
Cutting Wheels, Grinding Discs & Diamond Abrasives
Source cutting wheels, grinding discs, flap discs and electroplated diamond abrasives for metalworking and for grinding glass, ceramics and stone. Browse by product family, then send us your required size, grit and quantity for a wholesale quote.
Cut metal & stainlessGrind stock removalFinish flap-disc workDiamond hard / brittle materials
Choose by abrasive family. Original product photos, catalogue references and technical specifications remain below.
YUNDON · Industrial abrasives
Explore products by category
Browse 32 product photos across five families. Select a photo to enlarge it, or use its reference when asking for a quote. Confirm your required size, grit and backing with our team.
Diamond flap discs
19 photosElectroplated diamond flap discs for grinding and finishing hard materials. Select diameter, mounting style and grit.
Cutting & grinding wheels
5 photosResin-bonded cutting and grinding wheels for metalworking, including steel, stainless steel and cast iron. Specify diameter, thickness and bore.
Flap & abrasive cloth wheels
4 photosFlap and abrasive cloth wheels for deburring, surface preparation and finishing. Check abrasive type, backing and grit.
Hand polishing & diamond cloth
2 photosDiamond hand polishing and abrasive cloth formats for finishing glass, ceramics and stone. Select working size and grit.
Diamond sanding belts & flocking discs
2 photosDiamond sanding belts and flocking discs for grinding and polishing. Confirm dimensions, backing and grit before quoting.
Technical specifications
Detailed specifications — 42 catalogue references
Expand a product family for catalogue size examples. Specify diameter, thickness, bore, grit and backing as applicable; available configurations are confirmed when quoting.
T41 resin cutting wheels10 product references
Supplied industrial abrasives lower catalogue: representative size/diameter × thickness × bore; reinforcement and printed speed limits vary by individual construction. Verify the order label.
Photo reference: Category-level product reference preview, product family reference.
| Size (mm) | Common category | Source | Quote |
|---|---|---|---|
| 107 × 1.0 × 16 | Thin cutting | Confirm variant | RFQ → |
| 107 × 1.2 × 16 | Thin cutting | Confirm variant | RFQ → |
| 115 × 1.2 × 22 | Thin cutting | Confirm variant | RFQ → |
| 125 × 1.2 × 22 | Thin cutting | Confirm variant | RFQ → |
| 150 × 1.6 × 22 | Cutting wheel | Confirm variant | RFQ → |
| 180 × 1.6 × 22 | Cutting wheel | Confirm variant | RFQ → |
| 230 × 1.6 × 22 | Cutting wheel | Confirm variant | RFQ → |
| 300 × 2.0 × 25.4 | Large-format cutting | Confirm variant | RFQ → |
| 355 × 2.5 × 25.4 | Large-format cutting | Confirm variant | RFQ → |
| 400 × 3.0 × 25.4 | Large-format cutting | Confirm variant | RFQ → |
T42 depressed-centre cutting wheels6 product references
T42 depressed-centre cutting products, quoted by size and actual wheel label. Product photograph is a cutting-family reference.
Photo reference: Category-level product reference preview, product family reference.
| Dimension (mm) | Product format | Source | Quote |
|---|---|---|---|
| 100 × 3.0 × 16 | T42 depressed-centre | Confirm variant | RFQ → |
| 115 × 3.0 × 22 | T42 depressed-centre | Confirm variant | RFQ → |
| 125 × 3.0 × 22 | T42 depressed-centre | Confirm variant | RFQ → |
| 150 × 3.0 × 22 | T42 depressed-centre | Confirm variant | RFQ → |
| 180 × 3.0 × 22 | T42 depressed-centre | Confirm variant | RFQ → |
| 230 × 3.0 × 22 | T42 depressed-centre | Confirm variant | RFQ → |
Grinding discs6 product references
Conventional resin-bond grinding range, dimension given as diameter × thickness × nominal bore. Confirm reinforcement, rpm and intended material per label.
Photo reference: Category-level product reference preview, product family reference.
| Dimension (mm) | Application | Source | Quote |
|---|---|---|---|
| 100 × 6.0 × 16 | Metal grinding | Confirm variant | RFQ → |
| 115 × 6.0 × 22 | Metal grinding | Confirm variant | RFQ → |
| 125 × 6.0 × 22 | Metal grinding | Confirm variant | RFQ → |
| 150 × 6.0 × 22 | Metal grinding | Confirm variant | RFQ → |
| 180 × 6.0 × 22 | Metal grinding | Confirm variant | RFQ → |
| 230 × 6.0 × 22 | Metal grinding | Confirm variant | RFQ → |
Conventional flap discs5 product references
Resin/coated abrasive flap discs; the supplied pages show different abrasive materials and backings for each diameter. Grit set shown for these product families is 40#, 60#, 80#, 120#.
Photo reference: Category-level product reference preview, product family reference.
| Size / bore (mm) | Catalogue construction | Source | Quote |
|---|---|---|---|
| 100 × 16 | Brown alumina; steel / fiberglass / nylon backing options | Confirm variant | RFQ → |
| 115 × 22.23 | Flap-disc family; confirm backing/abrasive type | Confirm variant | RFQ → |
| 125 × 22.23 | Fiberglass backing; various alumina options | Confirm variant | RFQ → |
| 150 × 22.23 | Calcined alumina / fiberglass example | Confirm variant | RFQ → |
| 180 × 22.23 | Calcined alumina / fiberglass example | Confirm variant | RFQ → |
Electroplated diamond flap discs5 product references
Representative electroplated diamond-flap disc reference: 60#, 120#, 200#, 400#. Dimensions, flap count and backing vary; do not treat the thumbnail as a photo of each mounting option.
Photo reference: Category-level product reference preview, product family reference.
| Size / mount | Published construction examples | Source | Quote |
|---|---|---|---|
| 50 mm / 5.8 mm bore | 31 flaps · 14 × 12 mm | Confirm variant | RFQ → |
| 115 mm / 22.23 mm bore | 50–80 flap-count examples, backing varies | Confirm variant | RFQ → |
| 125 mm / 22.23 mm bore | Aluminium / fiberglass variants · 29 × 17 mm flaps | Confirm variant | RFQ → |
| 125 mm / M14 | Integrated threaded backing example | Confirm variant | RFQ → |
| 180 mm / 22.23 mm bore | 60+60 flap configuration · 35 × 17 mm | Confirm variant | RFQ → |
Diamond hand, grinding, flocking & flexible formats10 product references
Additional electroplated-diamond families as presented in the supplied upper catalogue. Grit options depend on the exact design; the range must be reconfirmed for each RFQ.
Photo reference: Category-level product reference preview, product family reference.
| Catalogue format | Documented size/grit or use | Source | Quote |
|---|---|---|---|
| Diamond hand pad 95 × 55 × 30 mm | EVA foam; 60# / 120# / 200# / 400# | Confirm variant | RFQ → |
| Diamond grinding disc 100 mm | Grinding-disc product family | Confirm variant | RFQ → |
| Diamond flocking disc 50 mm | Wave-pattern flocked disc; 60# / 120# / 200# / 400# | Confirm variant | RFQ → |
| Diamond flocking disc 75 mm | Wave-pattern; 60# / 120# / 200# / 400# / 600# / 800# | Confirm variant | RFQ → |
| Diamond flocking disc 100 mm | Wave-pattern; 60# / 120# / 200# / 400# / 600# / 800# | Confirm variant | RFQ → |
| Diamond mounted flap wheel 25 × T25 × 6 mm | 6 mm shank; published flap wheel example | Confirm variant | RFQ → |
| Diamond mounted flap wheel 30 × T20 × 6 mm | 6 mm shank; published flap wheel example | Confirm variant | RFQ → |
| Diamond mounted flap wheel 50 × T15 × 6 mm | 6 mm shank; published flap wheel example | Confirm variant | RFQ → |
| Diamond sanding belt 260 × 60 mm | Illustrated belt-size example; confirm production tolerance | Confirm variant | RFQ → |
| Diamond jumbo roll 50 / 100 × 0.50 m | Illustrated jumbo-roll example; confirm exact width/order length | Confirm variant | RFQ → |
Product configuration and size table
Reference dimensions and configurations are shown for product selection. Confirm backing, grit, dimensions and orderable variants when requesting a quote.
| Family | Size / mounting | Backing and construction | Grit or rating | Ordering note | RFQ |
|---|---|---|---|---|---|
| Diamond flap disc | 50 mm / 9.6 mm bore | 31 flaps; 14 × 12 mm; nylon substrate | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 115 mm / 22.23 mm bore | 62 flaps; 24 × 17 mm; fiberglass | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 115 mm / 22.23 mm bore | 72 flaps; 30 × 15 mm; fiberglass | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 115 mm / 22.23 mm bore | 80 flaps; 24 × 17 mm; aluminum backing | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 125 mm / 22.23 mm bore | 80 flaps; 29 × 17 mm; aluminum backing | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 125 mm / M14 thread | 80 flaps; 29 × 17 mm; integrated aluminum | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 125 mm / 22.23 mm bore | 31+31 flaps; 29 × 17 mm; fiberglass | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 125 mm / 22.23 mm bore | 62 flaps; 29 × 17 mm; fiberglass | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond flap disc | 180 mm / 22.23 mm bore | 60+60 flaps; 35 × 17 mm; fiberglass | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond hand pad | 95 × 55 × 30 mm | EVA foam; wave or diamond pattern; diamond layer 93 × 53 mm | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond hand pad | 65 × 65 mm | EVA foam; 63 × 53 mm diamond layer; wave pattern | 60# / 120# / 200# / 400# | Confirm variant | Quote → |
| Diamond grinding disc | 100 mm | Electroplated diamond / flocked backing | 60# / 120# / 200# / 400# / 600# / 800# | Confirm variant | Quote → |
| T41 resin cutting wheel | 107 × 1.2 × 16 mm | Single reinforced mesh; half label, red variant | Confirm printed SKU-specific rating | Confirm variant | Quote → |
| T41 resin cutting wheel | 107 × 1.0 × 16 mm | Double reinforced mesh; half label, yellow variant | Confirm printed SKU-specific rating | Confirm variant | Quote → |
| T41 resin cutting wheel | 150 × 1.6 × 22.23 mm | Double reinforced mesh; full label, green variant | Confirm printed SKU-specific rating | Confirm variant | Quote → |
| T41 resin cutting wheel | 180 × 1.6 × 22.23 mm | Double reinforced mesh; full label, green variant | Confirm printed SKU-specific rating | Confirm variant | Quote → |
| T41 resin cutting wheel | 230 × 1.6 × 22.23 mm | Double reinforced mesh; full label, green variant | Confirm printed SKU-specific rating | Confirm variant | Quote → |
| Grinding disc | 100 × 6.0 × 16 mm | Double reinforced mesh; full label (catalogue variant) | Workpiece/maximum rpm per label | Confirm variant | Quote → |
| Grinding disc | 115 × 6.0 × 22.3 mm | 2.5 reinforced meshes; full label (catalogue variant) | Workpiece/maximum rpm per label | Confirm variant | Quote → |
| Grinding disc | 180 × 6.0 × 22.3 mm | 2.5 reinforced meshes; full label (catalogue variant) | Workpiece/maximum rpm per label | Confirm variant | Quote → |
| Grinding disc | 230 × 6.0 × 22.3 mm | 2.5 reinforced meshes; full label (catalogue variant) | Workpiece/maximum rpm per label | Confirm variant | Quote → |
| Conventional flap disc | 100 × 16 mm | 66 flaps; 21 × 17 mm; metal backing | 40# / 60# / 80# / 120# | Confirm variant | Quote → |
| Conventional flap disc | 100 × 16 mm | 72 flaps; 21 × 17 mm; fiberglass | 40# / 60# / 80# / 120# | Confirm variant | Quote → |
| Conventional flap disc | 125 × 22.23 mm | 80 flaps; 28 × 17 mm; fiberglass | 40# / 60# / 80# / 120# | Confirm variant | Quote → |
| Conventional flap disc | 150 × 22.23 mm | 120 flaps; 29 × 17 mm; fiberglass | 40# / 60# / 80# / 120# | Confirm variant | Quote → |
| Conventional flap disc | 180 × 22.23 mm | 109 flaps; 35 × 18 mm; fiberglass | 40# / 60# / 80# / 120# | Confirm variant | Quote → |
Sizes shown are examples from our abrasives manufacturing partner product catalogues. Images are edited product references, not verified photos of every orderable SKU. Confirm product construction, current safety markings and required certifications for the exact item before ordering.
Specification note: Grit, bore, backing and reinforcement differ across variants. Aurorvix confirms the selected configuration and manufacturer-provided documentation before quoting.
01 · Choose by process
Start with the job, then narrow the abrasive.
Cutting wheels
Thin resin-bonded wheels for metal, carbon steel, cast iron and stainless-steel applications shown in the supplied catalogue.
Conventional range ↓Grinding discs
Reinforced resin-bonded discs for material removal and general angle-grinder work.
Grinding examples ↓Flap discs
Layered abrasive formats for blending, deburring and finishing, with conventional and diamond product families documented.
Flap-disc range ↓Electroplated diamond
Products aimed at hard and brittle materials including glass, ceramics, stone, carbide and composite materials.
Diamond range ↓Cutting wheels · product visual
Flap discs · finishing family
Broader abrasive range · industrial abrasives02 · Conventional resin-bonded range
Cutting, grinding and flap-disc formats.
The supplied catalogue documents conventional abrasive products using resin-bonded construction. Available sizes and ratings are confirmed SKU by SKU in the quotation.
Cutting wheel examples115×1.2×16 mm · 125×1.2×22 mm
T42 example100×3.0×16 mm
Grinding disc example125×6.0×22 mm
Flap disc example115×22.3 mm · 36#–120#
MetalCarbon steelCast ironStainless steel
Specification snapshot
Representative catalogue specifications buyers can quote against.
| Thin cutting wheel | 115×1.2×16 mm · 125×1.2×22 mmThe supplied catalogue positions these examples for cast iron, carbon steel and stainless steel; exact label, reinforcement and rating remain SKU-specific. |
|---|---|
| 115×1.2×22 example | WA36SBF · MAX 80 m/s · MAX 13,300 RPMThis rating appears on a specific catalogue example and must not be generalized to every size or wheel construction. |
| Grinding disc | 125×6.0×22 mmCatalogue positioning includes carbon steel, stainless steel and heavy-duty cast iron grinding. |
| Diamond flap disc | 115×22.23 mm · 60# / 120# / 200# / 400#Electroplated diamond examples cover hard and brittle materials including glass, ceramics, stone, carbide and composites. |
| Representative 125 mm diamond family | 22.23 mm bore or M14 variants appear in the catalogueFlap count, substrate and grit depend on the selected construction. |
| RFQ inputs | Workpiece · operation · diameter · thickness / bore · grit / finish · quantity · packagingFinal product rating and construction are confirmed against the exact SKU before quotation. |
The table uses representative source-catalogue examples. Size or speed data from one SKU is not applied to another SKU unless the manufacturing partner confirms it.
Abrasive product familiesSelected industrial abrasives product families
Selection discipline
Do not choose the wheel from diameter alone.
Quotation should be matched to workpiece, operation, wheel type, size, grit or finish target, quantity and packaging requirement.
WorkpieceOperationWheel typeSizeGrit / finishPackaging
03 · Electroplated diamond range
Superhard abrasives in multiple working formats.
Diamond flap disc115×22.23 mm
Catalogue examples show 60#, 120#, 200# and 400# grit options.
Diamond hand pad95×55×30 mm
Manual polishing / repair format documented for hard and brittle materials.
Grinding / flocking discsSurface, edge and chamfer work
Electroplated diamond formats for grinding and polishing applications.
Flexible formatsCloth · belts · jumbo roll
The documented range extends beyond discs to flexible abrasive formats.
04 · What to send for quotation
Six inputs are usually enough to start.
For OEM / private label, add artwork status, target market and packaging requirement. Aurorvix confirms the exact construction and product rating against the requested SKU before quoting.
01 · Workpiece material02 · Product type03 · Diameter / thickness / bore04 · Grit or finish requirement05 · Quantity06 · Destination & packaging
05 · Product details
Product specifications and order options are confirmed for each quotation.
Product categories and sample dimensions are based on our abrasives manufacturing partner catalogues. Aurorvix handles buyer enquiries and export sourcing coordination.
Photo & specifications
Photos are edited product references supplied for selection; size examples come from the manufacturer catalogues. Final product specifications and documentation must be confirmed for your order.
Tell us what you need to cut, grind or finish.
Material, product type, size, grit, quantity and destination are enough to begin matching the correct abrasive.
Buyer questions · Specification-first sourcing
Industrial abrasives wholesale questions
Can I request a wholesale quote for 115 mm diamond flap discs?
our abrasives manufacturing partner lists 115 × 22.23 mm diamond flap-disc configurations and examples of 60#, 120#, 200# and 400# grits. Tell us your mounting style, target material and order quantity to confirm an available combination.
What details should I provide for cutting or grinding wheel quotes?
Tell us the material being processed, wheel diameter, thickness, bore, required cutting or grinding operation, quantity and destination. For private-label orders, include packaging requirements; the manufacturer will confirm rating, MOQ and lead time.
Does Aurorvix manufacture or certify these abrasives?
our abrasives manufacturing partner is the abrasives manufacturer represented in the supplied catalogues. Aurorvix coordinates sourcing and wholesale enquiries; any requested certificate must be checked for its holder, current validity and product scope.